USER MANUAL
DVI MATRIX ROUTER
– ODM1818
ODM1818 Manual - Edition 7a
Page 16
5) Select
OK
to go to the
COM Properties
dialog box.
Figure 2-4 COM Properties Dialog
6) Configure the port settings as follows;
Bits per second (baud rate): 19200 (recommended)
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
7) Select
OK
to display the HyperTerminal window
8) Press ENTER on ODM1818 to begin communication with
ODM1818
9) Type serial command set. (Refer to Chap. 3.2)
2.7.2
Telnet
Telnet is a terminal emulation program for TCP/IP networks such as the Internet.
The Telnet program runs on your computer and connects your PC to a server on
the network. You can then enter commands through the Telnet program and they
will be executed as if you were entering them directly on the server console. This
enables you to control the server and communicate with other servers on the
network
2.7.3
LAUNCHING TELNET SESSION
1) Select
Start
menu and select
Run
.
2) Type
command
as shown below.