![background image](http://html1.mh-extra.com/html/opticis/odm1818/odm1818_user-manual_1641716018.webp)
USER MANUAL
DVI MATRIX ROUTER
– ODM1818
ODM1818 Manual - Edition 7a
Page 18
2.8 Ethernet Control
The ODM1818 can be controlled through the 10/100 base Ethernet port using either
graphic user interfaces or a command line interface.
The graphic user interfaces uses both standard web browser such as Microsoft Internet
Explorer and proprietary PC software.
The physical connection of ODM1818 can be made by the standard LAN or point to point
connection.
The command line interface uses a Telnet session to a private port.
To connect ODM1818 to Ethernet, specify static IP address for ODM1818 (Refer to Chap.
2.6.5). The default IP address is 192.168.0.44.
2.8.1
SETTING THE IP ADDRESS of the PC
If the PC is connected to the ODM1818 through the 10/100 Base Ethernet port, a
static address should be configured on the PC:
1)
Use Ethernet cross-type cable
(provided with ODM1818) for
point-to-point direct connection between PC or controller and
ODM1818 and LAN connection.
2) From the PC: select
Start
menu, select
Control Panel
.
3) In the
Control Panel
, select
Network Connections
.
In
Network Connections
, right click on
Local Area Connection
and select
Properties
tab.
Figure 2-7 Local Area Network Properties
Select
Internet Protocol (TCP/IP)
and click on
Properties
.
In the Internet Protocol (TCP/IP) Properties, click
Use the following IP ad-
dress
radio button.
Enter IP address compatible with the current IP address of the ODM1818.