Optal 4 Glass 2 burners, Installation & Operation Manual

Page: 133 / 166

18 / 65
© 20
11 Mertik Maxitrol GmbH & Co. KG,
All Rights Reserved.
EN
G
LIS
H
▪
TEMP
–
Nighttime Setback Tem-
perature Mode (Appliance must be
in standby mode; pilot ignited): The
room temperature is measured and
compared to the Nighttime Setback
T
automatically adjusted to achieve the
Nighttime Setback Temperature.
▪
TIMER
– Timer Mode (Appliance must
be in standby mode; pilot ignited): The
Timers P1 and P2 (Program 1, Program
2) each can be programmed to go ON
-
tions see Timer Programming Mode.
SETTING °C/24 HOUR OR °F/12 HOUR CLOCK
▪ Press OFF and
until display changes from Fahrenheit/12
hour clock to Celsius/24 hour clock and
vice versa.
▪ The
a) Installing the battery or
b) Simultaneously pressing the (large
▪ Press
hour.
▪ Press
minute.
▪ Press OFF or simply wait to return to
manual mode.
SETTING THE TIME
▪ pressing the SET button chang-
es the mode of operation in the follow-
ing order:
MAN
→
TEMP
→ → →
TEMP
→
TIMER
→ and back to
MAN
.
NOTE: Manual mode can also be reached by pressing
either the
button.
▪
MAN
– Manual Mode:
▪
TEMP
– Daytime Temperature Mode
(Appliance must be in standby mode;
pilot ignited):
The room temperature is measured
and compared to the set temperature.
adjusted to achieve the Daytime Set
Temperature.
▪ – Light/Dimmer Setting Mode:
Turns light/dimmer ON and OFF and
adjusts brightness.
▪ –
Circulating Fan Setting Mode
:
Turns circulating fan ON and OFF and
adjusts fan speed.
E T O N : To turn OFF fan press (small
bars dis appear.
MODES OF OPERATION
NOTE: The display shows the set temperature every
30 seconds.
OPERATING INSTRUCTIONS FOR OEM USE ONLY
APPENDIX B
A p p e n d i x B