13 / 65
© 20
11 Mertik Maxitrol GmbH & Co. KG,
All Rights Reserved.
EN
G
LIS
H
Pilot Flame Adjustment
(Vented Units Only)
⅜
” to ½” of the
thermocouple – vented only (see gure 17).
1. The adjustment screw can be reached through a hole
in the MANUAL knob (see gure 16).
2. Turn the MANUAL knob to the
ON
position.
Outlet Pressure Adjustment
(Vented Units Only)
STANDARD REGULATOR OR THROTTLE
(Throttle CE only)
1. Connect a pressure manometer to the valve outlet
pressure tap. Pressure tap is opened by turning the
screw counterclockwise
.
Pressure regulator or throttle are located under the
cover and can be reached by removing the plug (see
2. Turn MANUAL knob and main valve knob to the
ON
position.
3. Turn pressure regulator adjustment screw to set required
turning clockwise
(pressure regulator models),
or decreased by turning counterclockwise
.
⅜ to ½ in.
(10 to13 mm)
thermocouple
vented gas appliances
Figure 17: Proper Flame Impingement on Thermocouple
Figure 16: GV60, Connections and Adjustment Options
Side Outlet
Side Inlet
Main Valve Knob
MANUAL
Knob
Bottom Outlet
Bottom Inlet
Pressure Regulator
Inlet Pressure Tap
Ou let Pressure Tap
Pilot Gas Adjustment
Screw (turn with
screwdriver)
Magnet Unit
Connection
Piezo Igniter
Tab 2.8 x 0.8 mm
NOTE:
Throttle model’s pressure is increased by
turning counterclockwise
; or decreased
by turning clockwise
.
4. After adjustment, replace the plug.
5. If no other adjustments are required, close pressure
tap(s) by turning the screw(s) full clockwise
.
Check all connections/pressure tap(s) for leaks.
6. If the
achieved by adjusting the gas valve, check the
gas valve inlet pressure using a manometer at the
valve inlet pressure tap. If the inlet pressure is in
the normal range, replace the gas valve; otherwise,
Figure 18: Combination Control GV60, Cover
Do not attempt to remove screws from the top of
gas valve. Do not change any adjustments marked
with tamper indicating paint. Motor knob is not to be
removed.
It is the appliance manufacturer’s responsibility to
determi
KNOB
POSITION FUNCTION
Main valve
OFF
through valve.
Main valve
ON
through valve if the pilot is lit
and thermocouple is gener-
MANUAL knob
MAN
Allows the pilot to be
manually ignited and
MANUAL knob
ON
Allows for automatic ignition.
INSTALLATION INSTRUCTIONS
FOR OEM USE ONLY
GAS CONTROL KNOB SETTINGS
ADJUSTMENT
3. It
with a screwdriver to reach the adjustment screw
beneath.
4. Turn the adjustment screw clockwise
to decrease
or counterclockwise
Pressure regulator or throttle
APPENDIX B
A p p e n d i x B
Summary of Contents for 4 Glass 2 burners
