KVM over IP User Manual
Page 8 of 109
2.
Installation and Start Up
Introduction
This chapter overviews the general installation and configuration of your IP-KVM and steps through
in detail the physical installation and connection to controlled devices
2.1
General installation and configuration steps
Step 1
Check kit contents (refer
Chapter 2.2
)
Step 2
IP-KVM installation and connection to the target server and network (refer
Chapter
2.5 - 2.7
)
Step 3
Configure the IP-KVM network settings (refer
Chapter 3.1 - 3.3
)
Step 4
Configuring the KVM settings for the Target Server and IP-KVM (refer
Chapter 3.4)
2.2
Package checklist
The IP-KVM package consists of the followings items:
The IP-KVM unit
CD-ROM (software utilities and user manual)
Quick Start Guide
DC power supply adapter
3-in-1 Integrated Adapting Local Cable
USB A-mini cable
Serial cable (RJ45 to DB9F)
Rack mounting kit (with brackets and screws)
Footpads set
2.3
Product Views
The IP-KVM has an attached 3-in-1 Integrated Host Cable to simplify cable connection. Similarly the
dual LAN ports provides flexibility of cascaded wiring and the palm size form factor enables flexible
installation.
Summary of Contents for IP-KVM 1001
Page 1: ...USER MANUAL IP KVM 1001 KVM over IP Switch User Manual Rev 1 0 April 30th 2009 ...
Page 13: ...KVM over IP User Manual Page 13 of 109 Figure 2 5 Cable Connections stand alone PS 2 ...
Page 15: ...KVM over IP User Manual Page 15 of 109 Figure 2 6 Cable Connections stand alone USB ...