KVM over IP User Manual
Page 23 of 109
3.2
Initial IP configuration using a web browser
The factory default settings for the IP-KVM unit are:
DHCP: Disable
Default IP address: 192.168.0.70
Default Net Mask: 255.255.255.0
Using your favorite web browser you can access the IP-KVM
from the Remote Console computer
that you
have IP connected to LAN1 (or LAN2):
Enter
https://192.168.0.70
(
for a secure SSL connection) or
http://192.168.0.70
(for an insecure
connection)
Note
Your web browser must be enabled to accept cookies, or else login is not possible
This will lead you to the IP-KVM login page as shown below:
Log in using the default system user name
super
and the default password
pass
When connecting to the IPK-KVM unit, the IPK-KVM system (web server, Telnet server or SSH
server) will prompt user to enter the user name and password in order to access to the system.
If this is the first time logging in, log in with the factory default username and password, you will
be prompted to change the default password.
M
ake sure to change the super user password immediately after you have
installed and accessed your IP-KVM for the first time. Not changing this
password for the super user is a severe security risk and might result in
unauthorized access to the IP-KVM and to the host
system
The IP-KVM home page will display
S
elect
Device Settings: Network
and under
Network Basic Settings
you can set new IP
address or enable DHCP/BOOTP
Summary of Contents for IP-KVM 1001
Page 1: ...USER MANUAL IP KVM 1001 KVM over IP Switch User Manual Rev 1 0 April 30th 2009 ...
Page 13: ...KVM over IP User Manual Page 13 of 109 Figure 2 5 Cable Connections stand alone PS 2 ...
Page 15: ...KVM over IP User Manual Page 15 of 109 Figure 2 6 Cable Connections stand alone USB ...
