KVM over IP User Manual
Page 17 of 109
With straight or cross-over Ethernet cables interconnect the IP-KVM devices using LAN1 or
LAN2 sockets
Connect one end of the Ethernet cable to LAN1 or LAN 2 jack of one of the IP-KVM devices
and the other end to the Remote Console computer
2.8
Cabling the connection to a multi-port KVM switch
As well as connecting to a standalone computer the IP-KVM host side can alternately be connected
to a multi-port KVM switch.
The installation procedures are as for stand-alone computer, except that the host signals are
connected to the
PS/2 Local Console
of the KVM Switch.
Figure 2.8 below depicts the cable connections:
Summary of Contents for IP-KVM 1001
Page 1: ...USER MANUAL IP KVM 1001 KVM over IP Switch User Manual Rev 1 0 April 30th 2009 ...
Page 13: ...KVM over IP User Manual Page 13 of 109 Figure 2 5 Cable Connections stand alone PS 2 ...
Page 15: ...KVM over IP User Manual Page 15 of 109 Figure 2 6 Cable Connections stand alone USB ...