KVM over IP User Manual
Page 61 of 109
click on
Connect Drive
and elect the drive to be redirected
click
OK
Select the drive you would like to redirect. All available devices (drive letters) are
shown here. Please note that the whole drive is shared with the remote computer,
not only one partition. If you have a hard disc with more than one partition all drive
letters that belong to this disc will be redirected. The Refresh button may be used
to regenerate the list of drive letters, especially for an USB stick.
Please be cautious if “Allow Write Support” is selected. All data on the shared
media can be destroyed
Write Support
This feature may be enabled here. Write support means that the
remote computer is allowed to write on your local drive. As you can imagine, this is
very dangerous. If both the remote and the local system try to write data on the
same device, this will certainly destroy the file system on the drive. Please use this
only when you exactly know what you are doing.
Device Authentication
The factory default Username is “super” and the default
Password is “pass”.
click
Connect
to redirect drive
Note:
Drive Redirection is only possible with Windows 2000 or later versions.The Drive Redirection works
on a low SCSI level and the SCSI protocol cannot recognize partitions; therefore the whole drive
selected will be shared instead of any particular partition.
While connecting to a legacy KVM switch, please select PS/2 mouse for
Keyboard/Mouse setting
from webpage. Otherwise you will not be able to use Hot-key.
click on
Connect ISO
then select the ISO image file and click
Open
Summary of Contents for IP-KVM 1001
Page 1: ...USER MANUAL IP KVM 1001 KVM over IP Switch User Manual Rev 1 0 April 30th 2009 ...
Page 13: ...KVM over IP User Manual Page 13 of 109 Figure 2 5 Cable Connections stand alone PS 2 ...
Page 15: ...KVM over IP User Manual Page 15 of 109 Figure 2 6 Cable Connections stand alone USB ...