On-Net Surveillance Systems, Inc.
NetDVMS 6.5e
Administration
107
There must be at least one hour between each archiving time.
To remove an archiving time from the list, select the archiving time to
remove from the list, and click the
Delete
button.
Note:
While archiving takes place, cameras for which archiving applies will
briefly stop recording, one after the other. Although the pause is very brief
(typically less than a second), it is therefore recommended that you specify
archiving times that are outside periods in which you expect to record
important video.
Time to add
Lets you add an archiving time to the
Daily archiving time
list.
You specify the required time by selecting the hour, minute and second
values respectively, then clicking the field's
up
and
down
buttons to
increase or decrease values.
Tip:
You may also simply overwrite selected hour, minute or second
values.
Add
Adds the archiving time specified in the
Time to add
field to the
Daily
archiving times
list.
Delete
Removes a selected archiving time from the
Daily archiving times
list.
Select
cameras for
which the
archiving
function
should apply
If the
Archive Setup
window's
Enable Archiving
check box is selected, this
section lists cameras for which archiving is possible.
The section lists all enabled cameras, i.e. cameras which, depending on
their individual settings, may transfer video to the surveillance system. The
section also lists the path to the archiving directory for each camera.
Tip:
If a particular camera is not listed, it is highly likely that the camera
is disabled. To check if a camera is disabled, look for the camera in the
Administrator
window
's
Device Manager
section. A disabled camera will be
clearly indicated by an icon
, and can be enabled if you right-click the
camera name.
Specifying that Archiving Should Apply for Specific Cameras
To specify that archiving should apply for a specific camera, select the
check box next to the name of the required camera.
Specifying that archiving should
apply for a specific camera
Remember that only when you click
OK
is archiving actually enabled for
the selected cameras.
Set all
Selects the check boxes for all cameras listed in the
Select cameras for
