Onkyo ED-301 Instruction Manual Download Page 16

16

3

2

1

Setting the listening mode

You may use the following features of the ED-301 depending on the software you play or your listening environment.

• Listening mode
• Cinema Re-EQ mode
• Midnight Theater mode
• LFE (Low Frequency Effects) mode

To set the listening mode

1

Press POWER.

2

Press INPUT-1 or INPUT-2.
Skip this step if the desired input mode is selected.
Do not press MULTI-CH INPUT or you will be unable to go on to
the next and later steps.

3

Press LISTENING MODE.
Each time you press this button, the listening mode shown on the
display changes.

Note:
Depending on the Dolby Digital software or playing equipment, the
program format or listening mode indication may be incorrect if
pausing, stopping or skipping of a track causes signal interruption. If
this occurs, you can restore the correct indication by replaying the
track.

Listening mode indication

When a PCM digital track or analog track is being played...

The 

DOLBY
PRO LOGIC

 indicator lights when the listening mode is “SURROUND”.

STEREO ........... Stereo mode
SURROUND .... Dolby Pro Logic mode

• "PHANTOM" appears if the Center speaker setting

is "NONE".

• "3 STEREO" appears if the L/R Surround speaker

setting is "NONE".

When a Dolby Digital track is being played...

The 

DOLBY
DIGITAL

 indicator lights. At the lower right end of the display, the

channels Dolby Digital uses are shown.
STEREO ........... Stereo mode
SURROUND .... Dolby Digital mode

• "PHANTOM" appears if the Center speaker setting

is "NONE".

• "3 STEREO" appears if the L/R Surround speaker

setting is "NONE".
If the Dolby Digital track is stereo, the 

DOLBY
PRO LOGIC

indicator lights.

The following listening modes may be set depending on the channels
used by the Dolby Digital soundtrack.
MONAURAL ... "MONAURAL" appears if a monaural signal is

output to the Center channel.

DUAL ................ "DUAL" appears if a monaural signal is output to

both the Right and Left Front channels.

Note:

S

 appears if a monaural signal is output to the Surround channels.

Dolby Digital program format
indication (This indication does
not change with the selected
listening mode.)

DOLBY
PRO LOGIC

DOLBY
DIGITAL

INPUT-1 

LS

S

RS

L

C

R

Listening mode

Decoding method

C

L

R

Summary of Contents for ED-301





















Reviews: