Onkyo DV-M301, Instruction Manual

Page: 67 / 80

67
3
Make video connections from the Slave
changer to either the VIDEO IN or S-VIDEO IN
jacks corresponding to the type of video
connections made from the Master changer
to the TV or AV component.
• This changer does not perform any processing of
the video signals. Therefore, video signals input
at the VIDEO IN jacks are not output from the
S-VIDEO OUT jacks, and video signals input at
the S-VIDEO IN jacks are not output from the
VIDEO OUT jacks.
• Component video connection from the Slave
changer is not possible.
Video connections
When composite video connection is made to a TV
or monitor, make composite video connections
from the VIDEO OUT jack on the Slave changer to
the VIDEO IN jack on the Master changer.
S-video connections
When S-video connection is made to a TV or
monitor, use a commercially available S-video cable
to make S-video connections from the S-VIDEO
OUT jack on the Slave changer to the S-VIDEO IN
jack on the Master changer.
Slave DV-M301 changer
Slave DV-M301 changer
After Master-Slave connections
have been made between two
DV-M301 changers
After connections between the two units have been
made, when the power is turned on, “-MASTER-” will
appear in the display window of the Master played and
“-SLAVE-” will appear in the display window of the Slave
player, and the two players will perform as a single unit.
Getting both players set up...
After connections have been made, it is recommended
to use the Setup Navigator for simultaneous setup of
both players. Settings made in the Setup Navigator are
applied to both players, however, the settings in the
Setup screen are applied to each player separately.
When Setup screen settings are changed during
playback, the setting is applied to the operating player.
Because some settings cannot be changed during
playback, stop disc playback before attempting to make
changes.
Notes
• The power of the Slave player is turned on and off
when the Master player is turned on and off.
STANDBY/ON on the Slave player will not work.
• The remote control will not operate when it is pointed
at the Slave player. Point the remote control at the
Master player to control the Slave player.
• The only button that can be used on the Slave player
is OPEN/CLOSE to open and close the hood on the
Slave player.
• When loading discs in the players, discs in the Master
player are numbered from 1 to 300 and discs in the
Slave player are numbered from 301 to 600.
• Single loader play on the Slave player is not possible.
• When connecting a commercially available PS/2
compatible keyboard or mouse for text input and other
player functions, be sure to make connections to the
Master player only.
• When Update All is performed, both players start at
the same time, and are shut off when the player with
more discs has finished the updating process. When
Update Add is performed, the discs in the Master
player are updated first, followed by the discs in the
Slave player, and then both systems are restarted
simultaneously.
To a TV or monitor
To a TV or monitor
ADV
ANCED FUNCTIONS
OUT
IN
VIDEO
OUT
IN
VIDEO
MASTER-SLAVE
CONTROL
MASTER
SLAVE
OUT
DIGITAL
(OPTICAL)
DIGITAL
(COAXIAL)
OUT
IN
OUT
IN
OUT
IN
VIDEO
S VIDEO
VIDEO SELECT
COMPONENT
VIDEO OUT
OUT
IN
Y PB PR
AUDIO
R L
MASTER-SLAVE
CONTROL
MASTER
SLAVE
OUT
DIGITAL
(OPTICAL)
DIGITAL
(COAXIAL)
OUT
IN
OUT
IN
OUT
IN
VIDEO
S VIDEO
VIDEO SELECT
COMPONENT
VIDEO OUT
OUT
IN
Y PB PR
AUDIO
R L
OUT
IN
S VIDEO
OUT
IN
S VIDEO
MASTER-SLAVE
CONTROL
MASTER
SLAVE
OUT
DIGITAL
(OPTICAL)
DIGITAL
(COAXIAL)
OUT
IN
OUT
IN
OUT
IN
VIDEO
S VIDEO
VIDEO SELECT
COMPONENT
VIDEO OUT
OUT
IN
Y PB PR
AUDIO
R L
MASTER-SLAVE
CONTROL
MASTER
SLAVE
OUT
DIGITAL
(OPTICAL)
DIGITAL
(COAXIAL)
OUT
IN
OUT
IN
OUT
IN
VIDEO
S VIDEO
VIDEO SELECT
COMPONENT
VIDEO OUT
OUT
IN
Y PB PR
AUDIO
R L