ChadEdit User Guide
27
All macros can be used on your USR-5, but only macro buttons in a macro
group panel can be edited on your USR-5.
To create a macro, take the following steps:
1. Double-click on a button or select a button by clicking on it and press the
INSERT key.
2. The Button Properties sheet appears. Select the
Action
tab.
3. The currently assigned list of actions is displayed on the right side of the
property page. The currently assigned jump panel is displayed underneath
the list of actions. Click on one of the buttons on the left side of the property
page to add an action to the list:
•
Alias:
click on this button to open a tree view of all devices, direct-
access and left/right keys, and buttons in the current CCF. Select an
item to add an alias to that item to the action list. When your USR-5 is
executing an action list and comes across an alias, the action list referred
to by that alias is executed. Aliases are shown in the action list preceded
by
[A]
for a device alias,
[K]
for a direct-access or left/right key alias,
and
[B]
for a button alias.
•
Delay:
click on this button to add a delay to the action list. Hold a SHIFT
key while clicking on this button to set the default delay duration. You
can always double click on a delay in the action list to change its duration.
Delays are shown in the action list preceded by a
[D]
.
•
SET IR:
click on this button. The Add IR sheet appears. IR codes are
shown in the action list preceded by a
[C]
. Proceed with step 6 of
How
do I assign an IR code to a button?
.
•
Delete :
click on this button to delete an action from the action list.
•
Beep :
click on this button to add a beep to the action list. You must
enter Frequency, Duty Cycle and Duration. You can always double click
on a
Beep
in the action list to change these parameters.
Beeps
are
shown in the action list preceded by a
[S]
.
•
Timer :
click on this button to add a timer action. See
How do I create
– add a Timer Action?
.
Summary of Contents for CHAD
Page 1: ...ChadEdit User Guide...
Page 10: ...ChadEdit User Guide 10...