![background image](http://html1.mh-extra.com/html/onkyo/chad/chad_user-manual_1637822012.webp)
12
ChadEdit User Guide
How do I download a configuration into my USR-5?
1. Start ChadEdit.
2. Connect one end of the USR-5 serial cable to your USR-5 and connect
the other end to a serial port of your PC.
3. Make sure you have a configuration in ChadEdit either by uploading one
from your USR-5 (see
How do I upload a configuration from my USR-
5?
) or by loading one from a file (see
How do I load a configuration
from a CCF into ChadEdit?
).
4. Click on
in the toolbar, or select
Download into USR-5
from the
File
menu.
5. ChadEdit generates the configuration. If the resulting configuration does
not fit in your USR-5’s available memory, ChadEdit will tell you it is too
large and cancel the download. Based on how oversized the configuration
is (ChadEdit displays this information both in absolute and relative terms)
you should delete some elements and try again.
6. ChadEdit now tries to connect to your USR-5. If ChadEdit cannot connect
to your USR-5, it will display a message saying
USR-5 not connected or
not responding
. You can click on the
Details >>
button to open a window
listing all the serial ports on your PC.
•
If another application is using the serial port to which your USR-5 is
connected you can either try another serial port or have the other
application release the serial port.
•
If ChadEdit could open the serial port to which your USR-5 is connected
but still could not connect, check to see if both ends of the cable are
properly inserted and if USR-5’s batteries have not run out. Then wait a
few seconds and try again. If after a number of tries ChadEdit still cannot
connect, try resetting your USR-5, wait until it beeps twice and try again.
7. After connecting to your USR-5, ChadEdit will check the configuration in
your USR-5.
•
If your USR-5 does not contain a valid configuration, ChadEdit will display
a message saying
Failed to get valid information from USR-5, do
you want to overwrite any configuration currently in USR-5?
. Click
No
or
Cancel
if you don’t want to overwrite the configuration in your
USR-5. Click
Yes
to continue downloading.
•
If your USR-5 contains a modified configuration, ChadEdit will display
a message with the creation date and time of this configuration, and
ask you if you want to overwrite it. Click
No
or
Cancel
if you don’t want
to overwrite the configuration in your USR-5. Click
Yes
to continue
downloading.
Summary of Contents for CHAD
Page 1: ...ChadEdit User Guide...
Page 10: ...ChadEdit User Guide 10...