![background image](http://html1.mh-extra.com/html/onkyo/chad/chad_user-manual_1637822018.webp)
18
ChadEdit User Guide
How do I assign an IR code to a button?
1. Open the panel view of the panel with the button to which you want to
assign an IR code.
2. Double-click on the button you want to assign an IR code to, or select the
button by clicking on it and press the INSERT key.
3. The button property sheet appears. Select the
Action
tab.
4. If the list of actions is not empty, select an action by clicking on it and
press the DELETE key until the list is empty (merely to ensure that this
button will only have a single IR code assigned to it).
5. Click on the
Set IR
button. The Add IR sheet appears.
6. There are two ways to assign an IR code.
•
to assign a code from the IR database:
a.
Select the device for which you want to set the IR code from the
Devices
drop-down list.
b.
Select the brand of the device from the
Brands
drop-down list.
c.
For some brands the IR codes are divided into different code sets.
Select, if necessary, the appropriate set from the
Code Set
drop-
down list.
d.
Select which function has to be performed from the
Functions
list.
e.
Click on the
Test IR
button to try out the selected function on your
USR-5. Before you perform this step, make sure to connect one end
of the USR-5 serial cable to your USR-5 and connect the other end to
a serial port of your PC. If the code set you selected doesn’t work
properly, return to the step
c
above and select a different code set.
f.
Click on the
OK
button.
•
to assign a code by learning it:
a.
Connect one end of the USR-5 serial cable to your USR-5 and
connect the other end to a serial port of your PC.
b.
Click on the
Learn IR
button.
c.
Press the button you want ChadEdit to learn on the remote you
want to learn from like you would do when learning on your USR-5
ChadEdit will return with one of three replies:
•
Learning completed successfully
.
The learned code has been
put in the list of actions. Press the
OK
button to close the button
property sheet and assign the code to the selected button.
•
Learning failed (timeout)
. ChadEdit successfully connected to your
USR-5, but somehow couldn’t learn the code. Try again and if it still
doesn’t work, refer to your USR-5 user guide to trouble shoot IR
code learning.
Summary of Contents for CHAD
Page 1: ...ChadEdit User Guide...
Page 10: ...ChadEdit User Guide 10...