After Sales Support
TEL: 1300 886 649
15
LOUD ON / OFF:
This function is used to enhance the intensity of bass, after entering
this mode,rotate the rotary encoder to choose loudness on or off.
VOL LAST/ADJUST:
Rotate the rotary encoder to choose between VOL LAST and VOL ADJ.
- VOL LAST: The unit switches on at the last volume level when it was
last switched off.
- VOL ADJ: This function allows you to set the switch-on volume level,
regardless of what level the volume was set at when the
unit was switched off.
PVOL:
To set the volume to a certain level, press the SEL button momentarily
until “PVOL” is shown on the LCD display. Then rotate the rotary
encoder to adjust to a certain volume level.
BEEP ON / OFF:
The car audio device is equipped with 2 beep tone on, beep tone off
function. After entering this mode by pressing the button, rotate the
rotary encoder to choose one.
- Beep on mode: The confirmation beep is heard whenever
a button is pressed.
- Beep off mode: The confirmation beep is switched off when
a key is pressed.
MUTE ON / OFF:
In power on mode, press the POWER ( )/ MUTE button briefly to
toggle mute on or off. The muted state will also be released when the
rotary encoder, MODE button is used.