![background image](http://html.mh-extra.com/html/onix/an-8006/an-8006_instruction-manual_1636185006.webp)
After Sales Support
TEL: 1300 886 649
5
6. Mount the sleeve by inserting the sleeve into the opening of the
dashboard and bend open the tabs located around the sleeve with
a screwdriver. Not all tabs will be able to make contact, so examine
which ones will be most effective. Bend open the appropriate tabs
behind the dashboard to secure the sleeve in place.
7. Reconnect the wire harness and the antenna and be careful
not to pinch any wires or cables.
8. Slide the unit into the sleeve until it locks into place.
9. To further secure the unit, use the supplied metal strap to secure
the back of the unit in place. Use the supplied hardware (Hex Nut
(M5mm) and Spring Washer) to attach one end of the strap to the
mounting bolt on the back of the unit. If necessary, bend the metal
strap to fit your vehicle’s mounting area. Then use the supplied
hardware (Tapping Screw (5x25mm) and Plain Washer) to attach
the other end of metal strap to a solid metal part of the vehicle
under the dashboard. This strap also helps ensure proper electrical
grounding of the unit.
Install the short threading terminal
of the mounting bolt to the back of
the unit and the other long threading
terminal to the dashboard.
Installation