After Sales Support
TEL: 1300 886 649
13
Reset the unit:
Operating the unit for the first time, after replacing the car battery or
changing the connections, you must reset the unit.
1. Turn off the unit power.
2. Press the OPEN ( ) button and remove the front panel, then press
the RESET button with a ballpoint pen to restore the unit to the
original factory settings.
Reset the unit:
In power off mode, switch on the unit by pressing any button except
the OPEN button and the EJECT ( ) button or inserting a disc into
the disc slot. When the system is on, press and hold the POWER ( )
button for several seconds to turn off the unit.
Sound Adjustment:
- Rotate the rotary encoder to adjust volume level.
- Press the SEL button once and/or repeatedly to select the following
sound modes:
Volume, bass, treble, balance and fader.
Press the VOL+ or VOL - button to adjust level of
the selected sound mode:
- VOL: Min,01,02 ~ 44,45,Max
- BAS / TRE: -6, -5 ~,0, ~ +5,+6,
- BAL: 6L,5L, ~,0, ~, 5R, 6R
- FAD: 6R, 5R, ~, 0, ~, 5F, 6F
NOTE: In each mode, when the mode has not been adjusted for 3
seconds, display mode returns to normal radio, DISC, SD/MMC
card, USB or AUX mode.
General operation