Onix AN-8006 Instruction Manual Download

Page: 34 / 36

After Sales Support

TEL: 1300 886 649

No sound

Volume is on minimum. Adjust volume to a

desired level.

The wiring is not

properly

connected.

Check the wiring

connection.

Sound skips

The installation angle is

more than 30

Adjust the installation

angle to less than 30

The surface of CD is

extremely dirty or has

been scraped.

Clean the disc or try to

replace with a new one.

The operation keys

do not work

1. The built-in

microcomputer is not

operating properly due

to noise.

1. Press the RESET

button to restore the

program.

2. The front panel is not

properly installed.

2. Fix the front panel

into its place.

No radio reception

The antenna cable is

not connected.

Insert the antenna

cable firmly into

the antenna socket of

this CD player.

In automatic search

mode the radio

does not stop at a

transmitting station.

The transmission

signals are too weak.

Select a radio station

manually.

Summary of Contents for AN-8006





































Search results

Summary of Contents for AN-8006

Reviews:

Related manuals for AN-8006

Brands by name

Popular brands

Onix AN-8006, Instruction Manual

Search results

Summary of Contents for AN-8006

Reviews:

Related manuals for AN-8006

Brands by name

Popular brands