After Sales Support
TEL: 1300 886 649
19
To store / recall a preset radio stations:
You can store up to a total of 18 FM and 12 MW radio stations in the
memory, manually or automatically.
To store a station:
- Select a band (if needed).
- Select a station by pressing the or buttons.
- Hold a preset button (M1~M6) which you want to store the station
for at least 2 seconds, the current station will be saved into the
relevant preset memory bank.
To recall a station:
- Select a band (if need).
- Press a preset button (M1-M6) briefly to recall the stored station.
Auto store / Preset scan:
- Preset scan:
Short pressing the PS / AS button, it scans each preset stations in the
memories of the current band. Each preset station will blink for 5 seconds
with releasing mute, then go to next station, finally the radio will go to
play the start preset station. Press again to stop preset scanning.
- Auto store:
Pressing the PS / AS button for more than 2 seconds, it will enter auto
store mode. The whole band is scanned and the six strongest stations
are stored into the preset memories, after scanning is finished.
Scan function:
Press the SCAN button briefly, the tuner starts scanning. When the
tuner detects a good station, it pauses for about 5 seconds after that
continues to scan. Press any function key to stop the scanning.
