4
The selection of installation place and notice of the air conditioner unit
●
The selection of the installation place of the air conditioner unit
The installation must accord with the national and local safe criterion.
Since the quality of installation would affect the operation directly, user should contact the seller
and have the conditioner installed and tested by the professional install personnel according to
the install instruction instead of install by himself/herself.
Only connect the power after all the installation works are finished.
●
The selection of the installation place of the indoor unit
☆
Prevent direct sun burn.
☆
Make sure that the top steeve, ceiling, and the structure of the construction etc. is strong enough to bear the weight of
the unit.
☆
The drainage pipe is easy to drain.
☆
The air flow is not blocked at the outlet and intake vents.
☆
The connecting pipe indoor and outdoor can by lead to outside conveniently.
☆
The unit cannot be installed in the place where stored the flammability, easy exploded thing or the place where would
have leakage of flammability and exploded gas.
☆
The unit cannot be installed in the place where has the corrupt gas and serious dust, saline fog, lampblack and huge
humidity.
Note
!
The air conditioner unit installed in the following place may have malfunction, if the malfunction cannot prevent,
please contact the Nominated Repair Center Of MIRC Electronics Ltd., Mumbai.
①
the place with greasy all around;
②
the seashore place with salinity and alkali;
③
the place with vulcanized gas( such
as vulcanized hot spring);
④
the place with high frequency equipment ( such as wireless equipment, electric welding
machine and medical treatment equipment);
⑤
the place with special environment.
●
The electric cord disposal
☆
The cord disposal should be installed according to the National Principal.
☆
The power must use the rated voltage and the electric circuit specific for air conditioner unit.
☆
Please don’t pull the power cord vigorously.
☆
All the electric equipment should be installed by the professional personnel according to the local law, regulation and
this instruction.
☆
The power cord diameter should be big enough, the destroyed power cord and connecting cord should be replaced by
the specific cord.
Summary of Contents for OV-R224P/Na-M
Page 35: ......