27
Remote controller operation procedure
Names and functions of every button of the remote control
NOTE!
●
Make sure that there is no obstruction between the remote control and the signal receptor.
●
The remote control signal can be received at the distance of up to about 10m.
●
Don’t drop or throw the remote control.
●
Don’t let any liquid flow into the remote control.
●
Don’t put the remote control directly under the sunlight or any place where is very hot.
ON/OFF
MODE
LIGHT
AUTO
TIMER
ONOFF
SWINGHUMID
SWING
AUTOFAN
SAVE
HR.
AIR
FAN
OPER
Set temp. : 16 c~30 c
Set temp. : 16 c~30 c
Set temp. : 16 c~30 c
Set temp. : 16 c~30 c
Set temp. increases 1 c
by pressing "+" and
decreases 1 c by pressing
"-" once.
TEMP. button
NOTE: The cooling only
units have no
mode.
Press the button to change
the mode according to the
following order
MODE button
Press the button to
change the speed of the
fan according to the
following order.
FAN button
SPEED
AUTO FAN
HEAT
COOL
DRY
FAN
Press the button to turn on
the unit. Press the button
once again to turn off the
unit and cancal the timer.
the guide louver swings
according to certain
angle when press once;
repress once to stop
operating.
button
SWING
on/off button
NOTE!
After every indoor unit received the turn off signal, the fan and electric inflate valve will continue to work for
20-70mins to make use of the rest cool or rest heat, while for preparation for the next work. And this is normal
phenomenon.
Summary of Contents for OV-R224P/Na-M
Page 35: ......
