Page 6
For technical questions, please call 1-888-866-5797.
Item 63781
3. Assemble a roof side rail using a 3-Way Side Connector B (9), an Extension Pole (2) connected to a Joist (3),
and then a 3-Way Side Connector A (8) on the far end.
The combined Extension Pole / Joist assembly (2, 3) connects to the straight ends of the Connectors,
and the curved ends of all Connectors must face up angled the same direction, as shown.
If that is not the case, incorrect Connectors were used, or they were assembled backwards.
Figure D: Roof Side Rail Assembly
4. Assemble a second identical roof side rail by repeating the instructions in step #3.
5. Connect the roof side rail assemblies to the ends of the Rafters (1), as shown below.
Figure E: Roof Side Rail Installation
6. Make sure all parts assembled up to this point are firmly joined together.
Tap parts together gently with a rubber mallet (sold separately) if needed.
Leg Assembly
Assemble an Extension Pole (2) to each of
four Corner Legs (6) as shown.
Figure F: Corner Leg Assembly
SAFETY
ASSEMBL
Y
MAINTENANCE
