Page 12
For technical questions, please call 1-888-866-5797.
Item 63781
Securing Ratchet Tie-Downs
1. Thread the strap through the spindle of the
Ratchet Tie-Down (11) as far as it will go.
2. Insert the S-hook of the Ratchet Tie-Down
into the outside hole in the Corner Leg (6).
3. Lift and lower the Ratchet’s handle to wind
and tighten the strap onto the spindle.
NOTICE: Excessive tightening will damage
straps, Covers, and Corner Legs.
Figure P: Threading Strap Through Spindle
Figure Q: Inserting Hook into Corner Leg
Figure R: Tightening Ratchet
Releasing Ratchet Tie-Downs
1. Depress the spring-loaded bar on the handle.
2. Open ratchet handle completely.
3. Unwind the strap.
Figure S: Releasing Ratchet
SAFETY
ASSEMBL
Y
MAINTENANCE
