Page 3
For technical questions, please call 1-888-866-5797.
Item 63781
Assembly Precautions
1.
Do not assemble in windy conditions.
2.
Assemble and install only in a flat, level
area that is sheltered from the wind.
3.
Assemble and anchor only according to
these instructions. Improper assembly or
inadequate anchoring can create hazards.
4. Check for utility lines, tree branches and
other structures before assembling.
5. Verify that installation surface has no
hidden utility lines before anchoring.
6. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
7. Keep assembly area clean and well lit.
8. Keep bystanders out of the area during assembly.
9. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
10. Product capabilities apply to properly and
completely assembled product only.
Use Precautions
1.
DO NOT USE IN HIGH WIND. Remove cover
if harsh weather or heavy rain threatens.
2.
For temporary use only.
Do not use as a permanent structure.
3.
Do not use as tent. Does not meet tent
flammability standards. Do not smoke
or use grill, heater, or ignition sources
inside or near Greenhouse. Risk of fire!
Greenhouse is not flame retardant.
4.
Do not operate any fuel burning device inside
the Greenhouse. Asphyxiation hazard!
5.
SNOW / DEBRIS ACCUMULATION HAZARD.
Do not allow snow, rainwater or debris
to accumulate or pool on top of the
Greenhouse. DO NOT enter a greenhouse
with accumulated debris on top.
6. This product is not a toy. Do not allow
children to play with or near this item.
7. Use as intended only.
8. Inspect regularly, tighten all loose hardware
and loose ropes, and secure all loosened
anchors. If any parts are damaged, bent, or
stretched, they must be replaced. Hardware
may loosen during normal operation stresses.
Loose hardware or damaged/altered parts will
compromise the structural integrity of this product.
9. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
Specifications
Overall Dimensions
6' L x 5' 10" W x 6' H
SAFETY
ASSEMBL
Y
MAINTENANCE
