Page 5
For technical questions, please call 1-888-866-5797.
Item 63781
Roof Frame Assembly
Note:
Much of this product’s assembly is done using slip fit construction. Make sure all parts seat completely
and securely. A rubber mallet (sold separately) can be used to gently tap parts in place to ensure a tight fit.
Figure A: Roof Assembly Overview
1. Assemble ridge using an Extension Pole (2) connected to a Joist (3) with a 3-Way Ridge Connector (7)
on each end. The combined Extension Pole / Joist assembly (2, 3) connects to the straight ends
of the Connectors and the curved, free ends of the Connectors are angled down, as shown.
Figure B: Ridge Assembly
2. Connect a Rafter (1) to each free end of the 3-Way Ridge Connectors (7), as shown.
Figure C: Rafter Assembly
SAFETY
ASSEMBL
Y
MAINTENANCE