Installation & User Manual – Oncam C-12 Series
©
Oncam Global Group AG, 2020. All rights reserved.
6
The Primary Administrator account is considered the root account for the camera and
therefore cannot be deleted. To remove this account and replace it with a Primary
Administrator with a different name, the camera must be
Reset to Factory Defaults (All
Settings or User Accounts Only)
, accessible via
Device > Maintenance/Support
.
1.2.1.2 Camera Configuration Tool (CCT)
1.2.1.2.1 Single or multiple Cameras
The Camera Configuration Tool can be used to create the Primary Administrator username and
password for first time use of the camera. Using this powerful tool, the same login details can
be created for multiple cameras at the same time, saving valuable time and resource during
installation.
1.2.1.2.2 Setting username and password
After the C-Series cameras have been discovered, any cameras that require login credentials
to be created will display
Set Password
under the
ACTIONS
column. Click the check box next
to each camera you want create credentials for and select the
Set Password
button. For
enhanced security, default username and passwords are not supported. Users will be required
to set a secure password, which will need to meet the minimum requirement below. Please
follow these steps to set up your login credentials.
Figure 3 CCT, Set Password
1.2.1.2.3 Username
Set an easily identifiable and memorable username for the Primary Administrator. The name
must be a between 4-12 characters in length. The username can consist of uppercase letters
(A-Z), lowercase letters (a-z) and numbers (0-9). Special characters are not supported.
Once created the username cannot be updated.
