Installation & User Manual - Oncam C-12 Series
©
Oncam Global Group AG, 2020. All rights reserved.
11
The top bar of the dashboard displays key camera information in the form of, the camera-
friendly name, it's IP Address and SD recording status. The following two functions are also
displayed on this bar:
2.1.1.4.1 Jump To
If you know the specific area of the web interface you want to go to, then simply type in the
beginning of it (e.g. Device) in the
Jump
to
search bar, and all the related options in the Camera
Web Interface will be displayed, click the area you want to go to and you will be taken directly
to that section.
2.1.1.4.2 Logout
The Camera Web Interface will automatically log you out after 15 minutes of inactivity. When
you have completed your changes, it is recommended to log out using the button in the top
right-hand corner on the information bar. Click it once and you will be logged out.
The login page will be displayed over the Camera Web Interface; therefore the Camera Web
Interface will still be visible in the background when you log out. However, it will not be
accessible until you log back in.
Figure 8 Dashboard Logout
2.1.1.5 Notifications Bar
The notification bar is located at the bottom of the screen and displays events, and the API
status of commands to the camera. The notification bar’s bell icon is displayed in red in case of
events or API error and for successful event notifications the color will be blue. Click the
notification bar to open an in-browser window to display the notification messages for more
information of the event. Once a message has been read it will turn grey.
006
-0
064
-0
545
–
BO
O
KL
ET
–
CA
M
ERA
D
IS
CO
VE
RY
A
ND F
IRS
T T
IM
E
ACC
ES
S
–
R
EV 2
