![background image](http://html1.mh-extra.com/html/omron/v780-series/v780-series_user-manual_743948045.webp)
2 - 7
2 System Configuration
UHF RFID System V780-series Reader/Writer User’s Manual (Z389)
2-1 R
F
ID Syst
em C
onf
igu
ratio
n
2
Precautions for Correct Use
• Ground the frame ground (GR) terminal on the power supply to 100
Ω
or less. Otherwise,
performance may deteriorate.
• The black wire in the Power Supply Cable (pin 4) is not used. Do not connect it to any termi-
nal.
• To use the Reader/Writer in Run Mode, connect the control signal wire (white) to +24 VDC of
the power supply. If you connect the control signal wire (white) to the 0-V side of the power
supply, the Reader/Writer will start in Safe Mode.
• Connect a power supply that meets the following conditions to the Reader/Writer.
Item
Condition
Supply voltage
24 VDC
−
15% to +10%
Output current
500 mA min.
Safety standard
SELV (Safety Extra Low Voltage)
Summary of Contents for V780 Series
