Omron V780 Series User Manual Download Page 293

Page: 293 / 398

8 - 3

8 Browser Interface

UHF RFID System V780-series Reader/Writer User’s Manual (Z389)

8-1 B

ser Op

eratio

n In

terface

* Windows is a registered trademark of Microsoft Corporation in the USA and other countries.

Permission has been obtained from Microsoft to use screen captures.

Precautions for Correct Use

• There may be problems with the display layout at any browser zoom rate other than 100%.

We recommend that you set the zoom to 100%.

• The browser interface communicates with the Reader/Writer periodically, which may cause

the operating indicators on the Reader/Writer to light green.

* Java software can be downloaded from the following URL:

URL: https://www.oracle.com/technetwork/java/archive-139210.html

(*URL is as of April 2019 and may change in the future.)

• Java and other trademarks that contain “Java” are the registered trademarks of Oracle Corporation

or its related companies.

Summary of Contents for V780 Series















































































































































































































































































































































































































Search results

Summary of Contents for V780 Series

Reviews:

Related manuals for V780 Series

Brands by name

Popular brands

Omron V780 Series, User Manual

Search results

Summary of Contents for V780 Series

Reviews:

Related manuals for V780 Series

Brands by name

Popular brands