![background image](http://html1.mh-extra.com/html/omron/v780-series/v780-series_user-manual_743948100.webp)
6 Functions
6 - 24
UHF RFID System V780-series Reader/Writer User’s Manual (Z389)
The RF communications timeout time lets you specify an upper limit to the time required to process
single-access or multiaccess communications. You can use this to provide leeway for details in
detecting RF Tags in the communications range or to adjust the timing of when responses are
returned.
The RF communications timeout time is measured from when the Reader/Writer starts executing a
communications command until an RF Tag is detected. If an RF Tag is not detected before the time-
out time expires, an RF Tag missing error response is returned. If an RF Tag has already been
detected when the timeout time expires, communications with that RF Tag are completed. (Commu-
nications after RF Tag detection will not be aborted for a timeout.)
The write verify setting can be used to automatically check the accuracy of written data for any com-
munications command that writes data to an RF Tag.
When a communications command is executed, communications diagnostics are performed to diag-
nose how much leeway there is in RF communications.
Monitoring status during operation helps create a more stable Reader/Writer and RF Tag installa-
tion.
*1. If you enable communications diagnostics, the communications time will be longer than when they are dis-
abled.
RF Communications Timeout Time
Setting item
Description
Default
Timeout time
1 to 60,000 ms (in 1-ms increments)
250 ms
Write Verification
Setting
Description
Default
Selected
After data is written to an RF Tag, the data is read to verify that the
correct data was written.
*1
*1. If verification shows that the read data is not the same as the write data, a verification error response is re-
turned. The written data will not be changed. Write the original data again.
Selected
Not selected
Verification is not performed after data is written to an RF Tag.
RF Communications Diagnostics
Setting
Description
Default
Enable
Diagnostics are performed when communicating with an RF Tag
and the results are displayed on the operation indicators and sent
to the host device.
Disable
Disable
Diagnostics are not performed during RF Tag communications.
Summary of Contents for V780 Series
