Omron V780 Series, User Manual

Page: 299 / 398

8 - 9
8 Browser Interface
UHF RFID System V780-series Reader/Writer User’s Manual (Z389)
8-2
Op
eratio
n In
terface
8
8-2
-4 RF
Communications Settings
Click the RF communication settings Button and then click the Basic settings Tab.
A tab page to set the basic parameters for communications with RF Tags will be displayed. You can edit
the settings.
For information on the basic settings, refer to 6-4-2 RF Communications Conditions: Basic Settings on
page 6-22.
Precautions for Correct Use
• Click the Set Button. The settings will be applied immediately.
• If you change the settings while the Reader/Writer is performing RF Tag communications,
noise measurement, or other processing, an error message will be displayed. Change the
settings when the Reader/Writer is in idle state.
8-2-4 RF Communications Settings
Basic Settings
Item name Description Default
RF communication
mode Select the communications mode.
Setting range: Once, Auto, or Focus Once
RF communication
speed Select the speed of communications with the RF Tags.
Setting range: Auto speed, High speed, or Normal speed Auto speed
RF communication
timeout Enter the timeout time for RF communications in milliseconds.
Setting range: 1 to 60,000 ms 250 ms
Write verify Select whether or not to use write verification.
Setting range: Enable or Disable Enable
RF communication
diagnostics Select whether or not to use RF communications diagnostics.
Setting range: Enable or Disable Disable
Click this button to set the
displayed values.