Omron V780 Series, User Manual

Page: 330 / 398

8 Browser Interface
8 - 40 UHF RFID System V780-series Reader/Writer User’s Manual (Z389)
RFCommunication-
Setting WriteVerify Gives the setting for write verification for
write communications.
Either “true” or “false” is specified.
true: Verification used.
false: Verification not used. true
RFCommunication
Diagnostics Gives the enable/disable setting for RF com-
munications diagnostics. It is set to true or
false.
true: Enable
false: Disable false
RFCommunication-
AdvanceSetting ReadTransmission
Power Gives the transmission power setting for read
RF communications commands. It is speci-
fied as a decimal value.
15 to 27: 15 to 27 dBm 27
WriteTransmission
Power Gives the transmission power setting for
write RF communications commands. It is
specified as a decimal value.
15 to 27: 15 to 27 dBm 27
Channel Gives the channel setting. It is specified as a
decimal value.
*1. You can specify the value depending on
the model number. For details, refer to
Channel on page 6-25 under 6-4-3 RF
Communications Conditions: Advanced
Settings
on page 6-25.
0
Gen2Session Gives the setting of the Gen2 session. It is
specified as a decimal value.
0 to 3: S0 to S3 0
AccessPassword Gives the access password for RF Tag com-
munications. It is specified in eight hexadeci-
mal digits.
A setting of 00000000 is treated as no pass-
word setting. 00000000
ContinuousTime Gives the setting of the continuous transmis-
sion time. It is specified as a decimal value.
*1. You can specify the value depending on
the model number. For details, refer to
Transmission Time on page 6-27 under
6-4-3 RF Communications Conditions:
Advanced Settings
on page 6-25.
*1. You can
specify the
value
depending
on the
model
number.
For details,
refer to
Transmis-
sion Time
on page
6-27 under
6-4-3 RF
Communi-
cations
Condi-
tions:
Advanced
Settings
on page
6-25.
StopTime Gives the setting of the stop time. It is speci-
fied as a decimal value.
*1. You can specify the value depending on
the model number. For details, refer to
Transmission Time on page 6-27 under
6-4-3 RF Communications Conditions:
Advanced Settings
on page 6-25.
Section name Entry name Description Default