Applicable Standards
6
xiii
4
Application Precautions
Caution
Be sure to observe the following precautions to ensure safety in installing or
operating the System.
·
Do not use the System in an environment subject to flammable, explosive,
or corrosive gases.
·
Do not attempt to take any Units apart, to repair any Units, or to modify any
Units in any way.
·
Be sure that all the mounting screws, terminal screws, and cable connector
screws are tightened to the torque specified in the relevant manuals.
·
Use crimp terminals of specified size for wiring.
·
Be sure that the items with locking devices are properly locked into place
before using the System.
·
Be sure that the DC Power Supply Unit exclusively designed for the V720
Series is used and is not connected to any other device.
·
Be sure that the power supply voltage is within the rated range of 24 VDC
+10% and -15%.
·
Install the ferrite core supplied with the V720-CD1D/CD2D according to the
specified instructions.
·
Be sure to observe all warnings, cautions, and safety precautions specified
in the manual.
5
Correct Use
Caution
Do not install the V720-CD1D/CD2D in the following locations:
·
Locations subject to direct sunlight.
·
Locations subject to condensation as the result of severe changes in
temperature.
·
Locations subject to corrosive or flammable gases.
·
Locations subject to shock or vibration.
Caution
Be sure to observe the following wiring precautions:
·
Do not wire the lines of the RFID System alongside high–tension or power
lines.
·
Check the polarity of each terminal and make sure not to make mistakes in
polarity.
Caution
Be sure to observe the following precaution when cleaning the V720-
CD1D/CD2D:
·
Organic solvents may damage the paint coating on the casing or resin part
of the product. Do not use paint thinner or any other organic solvent to
clean the product.
6
Applicable Standards
The V720-CD1D/CD2D ID Controller conforms to the following standards:
·
EC Directives EN55022: 1998
·
EC Directives EN55024: 1998
!
!
!
!
