Polling Mode
Polling Mode
is not used with the
V430-F
.
Change the Command that Executes Read (Serial (RS-232C))
It is possible to change the command used in Serial (RS-232C) communications to execute Read. The
method for changing the commands is the same as for Ethernet Serial (TCP) communications.
Additional Symbol Information that can be Appended
5
-1-4
Setting Data to be Output after Reading a Code (Serial
(RS-232C))
The code reader can be configured so that after a Read is executed, its read results are automatically
output using Serial (RS-232C) communications. Additional information such as print quality grade and
code position coordinates can be appended to the Read result output and the format of that output can
be modified.
The methods for setting the data is the same as for Ethernet Serial (TCP) communications.
3-2-4 Setting the Data to Output after a Read
5
-1-5
Additional Symbol Information that can be Appended (Serial
(RS-232C))
The list of additional Symbol Information that can be appended is the same as the list for Serial (TCP)
communications.
Additional Symbol Information that can be Appended
5
-1-6
Controlling Operation with Serial (RS-232C) from an External
De
vice
The code reader can be controlled, have its settings viewed and changed from an external device with
the use of serial commands.
The specifications for serial commands are the same as for Ethernet Serial (TCP) communications.
3-2-5 Controlling Operation from an External Device
5
-1-7
Serial Command List (RS-232C)
The list of Serial commands is the same as the list for Serial (TCP) communications
5
Controlling Operation and Data Output with RS-232C
5
- 7
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
5
-1 Controlling Operation and Data Output with RS-232C
5
5
-1-4
Setting Data to be Output after Reading a Code (Serial (RS-232C))