Member Name
Data Type
Bit Number
Data Length
Byte Offset
32 bit
Total
Read Cycle
Time
0 - 15
2 byte
Number of Decodes in Read
Cycle
0 - 7
1 byte
Number of Decode Reports
0 - 7
1 byte
RAW Input Data
16 byte
44 byte
Output Assembly (Instance ID: 197)
The Output Assembly can send several commands to the code reader.
Output Assembly Member Structure
Member Name
Size (Bytes)
COMMANDS
4
Total Size: 4 Bytes
Member Description
•
Commands
An explanation of commands that can be sent to the code reader.
Bit
Command
0
Run Mode
1
Trigger
2
Enable
Matchcode
3
Reset General Fault
4
Clear
No Read
Read Cycle
Count
er
5
Clear Mismatch
Read Cycle
Counter
6
Clear
No Read
Counter
7
Clear Trigger
Counter
8
Clear
Matchcode
Counter
9
Clear Mismatch
Counter
10
Output 1
11
Output 2
12
Output 3
13 - 31
Reserved
・
Run Mode
Enables / Disables Read Cycle. Immediately after the code reader is started, Read Cycle will be en-
abled regardless of this command.
0 = Read Cycle Disabled. No trigger can be accepted. However, other commands can be executed.
1
= Enables Read Cycle.
・
Trigger
Executes Read. The code reader recognizes this bit changing from 0 to 1 as the rising edge of the
trigger and its change from 1 to 0 as the falling edge of the trigger.
・
Enable
Matchcode
Enable / Disable the
Matchcode
function. Immediately after the code reader is started, the
previously
saved setting is in effect regardless of this command.
0 = Disable
Matchcode
function.
1= Enable
Matchcode
function.
Appendices
A - 29
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings
A-2 EtherNet/IP Detailed Specifications
A
A-2-1 Assembly Memory Allocation
