Omron V430-F Series, User Manual For Communication Settings

Page: 34 / 150

The following settings are set independent for each Output signal.
Change the Output signal number selection as needed for your application.
• WebLink -
Setup - Gear Icon - Advanced Settings - I/O - Trend Options (Output 1, 2, 3)
Setting Item Setting Value Description
Trend Analysis
Mode
•
Mismatch
• No Read
•
Decodes per
Trigger
•
Mismatch:
Turns ON when the number of Mismatches for the most recent
Number of Triggers cycle reaches the number set for Number
to Output On .
• No Read
:
Turns ON when the number of No Reads for the most recent
Number of Triggers cycle reaches the number set for Number
to Output On .
•
Decodes per Trigger:
Turns ON when the Number Of Decodes for the most recent
Number of Triggers cycle reaches the number set for Number
to Output On .
Number of Triggers 0 to 255 The number of triggers in the Trend Analysis.
For example, if you set this to
25 , the Trend Analysis will be done
for the most recent 25 trigger inputs.
Number to Output
On 0 to 255 This is the threshold for turning on the Output signal Trend Analy-
sis is assigned to.
For example,
Trend Analysis Mode :
No Read
,
Number of Triggers : 25 ,
Number to Output On : 4
With these settings, the output signal turns ON when there are 4
No Read
in the last 25 triggers.
Decodes per Trigger
Threshold 0 to 65535 When the number of codes read within the Read Cycle falls below
the Decodes per Trigger threshold, the Output signal turns ON.
Setting Example
•
Read Cycle
Trigger - Mode : External Edge
End of Read Cycle - Mode : Timeout
Capture Mode - Captures Mode : Continuous
•
I/O
Decodes per Trigger Output - Decodes/Trigger Status :
Enabled
Trend Analysis (Output 1)
- Trend Analysis Mode : Decodes
per Trigger
Trend Analysis (Output 1)
- Number of Triggers : 1
Trend Analysis (Output 1) - Number to Output On : 1
Trend Analysis (Output 1) - Decodes per Trigger : 10
10 or more Reads in the Read Cycle : Signal OFF
9 or less Reads in the Read Cycle : Signal ON
Below is an Output assignment example and Timing chart.
[Example assignment of OUTPUT signals]
• Output 1: In Read Cycle
• Output 2: Trend Analysis
Output Mode: Pulse
2 Controlling Operation and Data Output with Parallel
2 - 14
V430-F Series Autofocus Multicode Reader User Manual for Communication Settings