![background image](http://html.mh-extra.com/html/omron/v400-r2-series/v400-r2-series_connection-manual_741434018.webp)
7. Connection Procedure
15
7.2. Setting UP the Code Reader
Set up the Code Reader.
7.2.1. Cable Connection
Connect a cable to the Code Reader.
1
Connect the special cable
(V509-W011) to the Code
Reader.
Connect the 5 VDC power
supply to the special cable and
turn ON the power supply.
Precautions for Correct Use
This document explains the procedures for setting up the Code Reader from the factory
default setting. If the Code Reader was changed from the factory default setting, make sure
to initialize by referring to Section 8.2. Initializing the Code Reader.
Additional Information
For details on the factory default setting of the Code Reader, refer to
Factory default setting
in
Return to the factory default setting
in
Menu Sheet/Command List
in
Section 4 Setting
Method
of the
Ultra Small Multi-code Reader V400-R2 Series User's Manual
(Cat. No. Z333).
Special cable
(V509-W011)
5 VDC power supply
Code Reader
(V400-R2CF65)