![background image](http://html.mh-extra.com/html/omron/v400-r2-series/v400-r2-series_connection-manual_741434021.webp)
7. Connection Procedure
18
7.3.3. Checking the Parameters and Building
Check the parameters that are set, execute the program check on the project data and build
the Controller.
1
Double-click
CPU/Expansion
Racks
under
Configurations
and Setup
in the Multiview
Explorer.
2
The CPU/Expansion Racks Tab
is displayed in the Edit Pane.
Select the Serial
Communications Unit icon as
shown on the right.
Confirm that CJ1W-SCU42 is
displayed, the Device name is
J01, and the Unit No. is 0.
*If the settings are different,
change the values.
Click
Edit Special Unit
Settings
.
3
The 0 [Unit 0]: Tab is displayed.
Select
Port2: Protocol macro
Settings
from the pull-down list
of Parameter group to show.