![background image](http://html1.mh-extra.com/html/omron/tm-robot-tm12-series/tm-robot-tm12-series_hardware-installation-manual_743992044.webp)
Medium & Heavy Payload Series-Hardware Installation Manual TM12/14 Series Hardware Version: 3.2
44
Connector:
2P/1.5 mm pin pitch. Refer to JST model ZHR-4 series.
Dimming mode:
PWM control
NOTE:
The robot comes with the IP54 rating, but the Corporation does not guarantee this rating if
users replace with the other light modules.
DANGER:
Be aware that the tool must be correctly and firmly secured to use with this product; otherwise,
personal injuries or death may occur should the tool or the workpiece fall.
4.3 Operating Position of TM Robot with AGV/AIV
When TM Robot is placed on an AGV/AIV in operation, the TM Robot should be paused and should not exceed
the footprint of the AGV/AIV.
Fill light cable:
Figure 33: Electrical Polarity of Fill Light Cable
(+)
(-)