![background image](http://html1.mh-extra.com/html/omron/sysmac-w398-e1-1/sysmac-w398-e1-1_operation-manual_743883084.webp)
70
FinsGateway Configuration and Startup
Section 6-2
Configuring the Protocol
and Node
For Host Link, the protocol must be changed to SYSWAY-CV from the default,
(SYSWAY). The node number must match the node number used when the
PC was added to CX-Position.
1,2,3...
1.
Click the Nodes Tab.
2.
Set the node to 240 (shown in reverse video).
3.
Click the Property Button.
4.
Set the following configurations in the Add/Edit Serial Node Window.
• The node number must match the node number used under Networks
when the PC was added to CX-Position.
• The Type can be left as C200H.
FinsGateway
FinsGateway
default setting
Adding PC to CX-
Position
PC addition default
setting
Node... on the
Nodes Tab
Page.
240
Node Number under
Network Settings
0
Must be set to 240 if
FinsGateway is the
default.
Summary of Contents for SYSMAC W398-E1-1
