Omron SYSMAC W398-E1-1 Operation Manual Download Page 56

Page: 56 / 127

Automatic NC Unit Search

Section 3-4

3-4

Automatic NC Unit Search

When online, data from all the NC Units mounted in the online PC can be read
to automatically create NCs within a specified PC. At the same time, all the
data read from the NC Units of the specified PC can added as project data.

1,2,3...

Create a PC by either select Edit/New PC, or right-click and select New
PC from the pop-up menu.

Select the PC from the project tree and then select Online/Automatic NC
Search.

The Automatic NC Search Dialog Box, shown above, will be displayed.

Click the data upload checkbox to read all the data from the NC Units.

Click the OK Button to create NCs automatically. If there is data to be up-
loaded, the following window will appear.

If there is no data to be uploaded, the following window will appear.

Summary of Contents for SYSMAC W398-E1-1
































































































































Search results

Summary of Contents for SYSMAC W398-E1-1

Reviews:

Related manuals for SYSMAC W398-E1-1

Brands by name

Popular brands

Omron SYSMAC W398-E1-1, Operation Manual

Search results

Summary of Contents for SYSMAC W398-E1-1

Reviews:

Related manuals for SYSMAC W398-E1-1

Brands by name

Popular brands