![background image](http://html1.mh-extra.com/html/omron/sysmac-cj1w-ad04u/sysmac-cj1w-ad04u_operation-manual_743082041.webp)
22
Wiring
Section 3-2
Recommended Components
• The following screwdriver can be used when inserting and removing
wires.
Recommended screwdriver
• Recommended pin terminals and crimp tool
• Contact information for other companies
Allen-Bradley: www.ab.com
Phoenix Contact: www.phoenixcontact.com
Weidmuller: www.weidmuller.com
OMRON 24 Service (Japanese): www.omron24.co.jp
Input Wiring Precautions
Observe the following wiring precautions to optimize the Unit’s functions and
reduce the effects of noise.
• Use twisted-pair shielded wire for the input lines.
• Wire the input lines separately from power lines, such as AC power supply
lines. Do not place input lines and power lines in the same duct.
• Install a noise filter at the power supply input if noise is entering from the
power supply line, which may occur when the Unit is installed near high-
frequency equipment or the power supply is shared with a electric welding
machine or electric discharge machines.
Manufacturer
Model number
Compatible wire
Crimp tool
Weidmuller
H 0.5/16 D
0.5 mm
2
(20AWG)
PZ 6/5
H 0.75/16 D
0.75 mm
2
(18AWG)
H 1.5/16 D
1.25 mm
2
(16AWG)
0.4 mm
2.5 mm
Side
Front
Model number
Manufacturer
SD 0.4
×
2.5
×
75
Weidmuller
Summary of Contents for SYSMAC CJ1W-AD04U
