Omron SYSMAC C200H-ASC02, Operation Manual

Page: 17 / 171

5
6: The pin numbers for port 2 corrected in the diagram.
Left-Side DIP Switch Settings
OFF
ON : 0
: 1
1 2 3 4 5 6 7 8
Start mode
Pin No. 1 Function
Setting
0
Manual start mode
In this mode, the BASIC program is not
started upon power application. To start
the program, either press the START/
STOP switch or issue a start command
from the personal computer connected
to port 1.
1
Automatic start mode
In this mode, the BASIC program is
started automatically on power applica-
tion.
Automatic program transfer from EEPROM to RAM
Pin No. Function
Set this pin to “0” if only the
RAM is to be used.
2
Set this pin to “1” to automatically
transfer the program from the EE-
PROM to RAM on power applica-
tion or reset.
0
1
Setting
Program No.
Pin No. Function 3 4
0 0
1 0
0 1
1 1
No. 1
No. 2
No. 3
Setting
Screen size
Pin No. Screen Size
Setting
40 columns x 7 lines
40 columns x 8 lines
40 columns x 15 lines
40 columns x 16 lines
80 columns x 16 lines
80 columns x 15 lines
80 columns x 24 lines
80 columns x 25 lines
6 7 8
0 0 0
1
1
1 1
1
1
1 1
1 1 1
0 0
0 0
0
0 0
0
0
1
These pins select which program will be executed on
power application or reset. The program number can be
changed later with the PGEN command.
Not Used. Always set this pin to OFF.
Back Panel
Section 1-2