![background image](http://html1.mh-extra.com/html/omron/sysmac-c200h-asc02/sysmac-c200h-asc02_operation-manual_742429117.webp)
Specifications
Appendix B
110
Rear Panel
DIP switch, left
Sets the start mode,
screen size, etc.
Connector
DIP switch, right
Sets the baud rate for
each port.
Left-Side DIP Switch
Pin No.
Function
Description
1
Start mode
Sets automatic or manual mode for
start-up of a BASIC program upon power
application.
2
Automatic program transfer
from EEPROM to RAM
Specifies whether the BASIC program is
automatically transferred from the
EEPROM to RAM on power application or
reset.
3
Program No.
Sets the program number. The program
number can be changed by the PGEN
4
command.
5
Data Section mode
selector
Sets the Data Section to either two-word or
four-word mode
6
Screen size
Sets the screen size of the input device
7
8
Summary of Contents for SYSMAC C200H-ASC02
