![background image](http://html1.mh-extra.com/html/omron/sysmac-c200h-asc02/sysmac-c200h-asc02_operation-manual_742429121.webp)
Specifications
Appendix B
114
For
Port 1
For
Port 2
Data transmission
Data transmission
CLOSE
END
ON
OFF
DTR (output)
RTS (output)
ON
OFF
Data
OPEN
INPUT
Device Control Codes
Peripheral Device
Output
Terminal Display
At execution
The transmission buffer (screen) is cleared when code &H0C is output.
The cursor is set to the leftmost position of the screen when code &H0A (LF),
&H0D (CR), &H0B (HOME), or &H0C (CLR) is output.
The cursor is moved on the screen when code &H08 (BS), &H1C (->), or &H1D
(<-) is output.
Codes &H16 (cursor ON) and &H17 (cursor OFF) are ignored and are not output.
CLOSE
Nothing is executed
LPRT
At execution
The cursor is set to the leftmost position when code &H0A, &H0D, &H0B, or
&H0C is output.
If an output line exceeds 80 characters, code &H0A (LF) is automatically
appended to the line data.
CLOSE
If data remains in the transmission buffer, it is output with code &H0A appended
COMU
At execution
Data is output when characters are sent to the buffer.
CLOSE
If data remains in the transmission buffer, it is output.
Dimensions
Dimensions with ASCII Unit Mounted on PC
The depth of the ASCII Unit is 100.5 mm as shown in the following figure. However, when the Unit is mounted
on the PC and when a cable is connected to the Unit, the depth may increase up to 200 mm. Consider this
when mounting the ASCII Unit in a control box along with the PC.
Summary of Contents for SYSMAC C200H-ASC02
