Omron NQ HMI, Getting Started Manual

Page: 91 / 146

77
A-1-2 NQ with OMRON NT Link to OMRON CP1L PLC
To perform a successful communication proceed as follows.
1 Create a new project in NQ-Designer.
2 Add a NTlink
Node and settings as below and click Add...
3 Set all data as shown in the screenshot.
4 Create PLC tag with address
DM0000 .
5 Add a Numerical Data Entry object with tag address DM0000 to screen1 .
6 Download the application and firmware to the NQ-Series.
7 Open CX-Programmer.
8 Create a new project.
9 Select
CP1L and click OK .
10 Double-click Settings in the project panel.
11 Click Serial Port 1 tab.