Omron NQ HMI, Getting Started Manual

Page: 39 / 146

Using NQ-Designer Section 4-2
25
/i
Table 4.4: Default system tags (Bit)
S0010 RTC day Read RTC day in integer format
S0011 RTC month Read RTC month in integer format
S0012 RTC year Read RTC year in integer format
S0013 RTC hour Read RTC hour in integer format
S0014 RTC min Read RTC minute in integer format
S0015 RTC sec Read RTC second in integer format
S0016 RTC day of the week Read RTC day of week in integer
format
S0017 Scan time register Read Shows time required to
execute screen, screen task
and global task in millisecond.
Use ####.## format for
display.
S0018 Communication recover
time[s] for port1 Read/Write Shows time in seconds to
recover the communication
with failed nodes for port1. The
default value is 60 sec.
S0020 Driver scan time register
for port1 Read Shows time required to
execute screen blocks in
milliseconds. Use ####.##
format for display.
S0023 Popup screen trigger
register Read/Write Holds the screen number for
the pop-screen that will be
shown when bit s20 bit is set.
S0116 Fact_Appln_1 Read/Write Reserved
S0117 Fact_Appln_2 Read/Write Reserved
S0118 Fact_Appln_3 Read/Write Reserved
S0119 Fact_Appln_4 Read/Write Reserved
S0120 Fact_Appln_5 Read/Write Reserved
S0121 Contrast control
(Retentive register) Read/Write This retentive register used for
setting the contrast of the NQ-
Series.
S0122 Brightness control
(Retentive register) Read/Write This retentive register used for
setting the brightness of the
NQ-Series.
S0123 Fact_Appln_6 Read/Write Reserved
S0124 Fact_Appln_7 Read/Write Reserved
S0125 Fact_Appln_8 Read/Write Reserved
Register Tag name Read/Write Description
S0003_00 Logger memory full status Read 1: full memory
S0003_01 Logger memory clear
status
Read 1: memory clear is
being executed
Register Tag name Read/Write Description