Omron NQ HMI, Getting Started Manual

Page: 41 / 146

Using NQ-Designer Section 4-2
27
s0017 Invalid key beeper Read/Write 0: disable valid screen
beeper
1: enable valid screen
beeper.
When set to 0 the NQ-
Series will only generate
a beep when an input
area is pressed.
This bit can be changed
during operation
s0019 Invalid date entry Read 0: valid date
1: invalid date (range
not within defined
ranges e.g. month > 12)
s0020 Popup screen control coil Read/Write Triggers the popup
screen number stored in
S0023
s0021 Communication recover
enable bit: port1 Read/Write If this bit is set
communication with the
failed nodes is detected
after scan time S0018
for port1 (on by default)
s0028 Bittask datalogger-logger
group1 bit Read/Write User can start/stop
logging in bit task mode
for group1 by using this
bit.
1: Start logging
0: Stop logging
s0029 Bittask datalogger-logger
group2 bit Read/Write User can start/stop
logging in bit task mode
for group2 by using this
bit.
1: Start logging
0: Stop logging
s0030 Bittask datalogger-logger
group3 bit Read/Write User can start/stop
logging in bit task mode
for group3 by using this
bit.
1: Start logging
0: Stop logging
s0031 Bittask datalogger-logger
group4 bit Read/Write User can start/stop
logging in bit task mode
for group4 by using this
bit.
1: Start logging
0: Stop logging
s0032 Lock data entry Read/Write User can lock/unlock
the data entry (keypad
entry).
0: data entry unlock
1: data entry lock
Register Tag name Read/Write Description