.
.
.
.
.
OMRON Scientific Technologies Inc.
15
© OMRON STI 0613 PN99804-0060 Rev. B
Blanking switches off and then on. The user may start normal operation by a press and release of the
Start button or by performing a power cycle. See Figure 4-6
Selecting Fixed Blanking Procedure 5
.
Figure 4-6 Selecting Fixed Blanking Procedure 5
To exit Fixed Blanking the user sets both selector switches to the off position, then either presses and
releases the Start button or performs a power cycle. The receiver will power up with the amber LED
off.
Figure 4-7 Selecting Fixed Blanking Procedure 6
IBIs of blocked
beams on.
Amber LED is off to indicate
in Fixed Blanking is disabled.
3
2
1
5
4
6
3
2
1
5
4
6
ON
ON
on
on
SWA
SWB
IBIs of blocked
beams on.
The amber LED and IBIs quit flashing
to indicate program switch is disabled.
The yellow LED turns on to indicate the
Start button is active.
3
2
1
5
4
6
3
2
1
5
4
6
ON
ON
off
off
SWA
SWB
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
