9
OMRON Scientific Technologies Inc.
© OMRON STI 0613 PN99804-0060 Rev. B
28
9 . 3 G
E N ER AL
M
O UN T I NG
C
O NS ID E RA T I ON S
9.3.1
A
DDITIONAL
G
UARDING
Areas of access to the point of hazardous operation not guarded by the MS4800 system must be
protected by suitable means such as a fixed barrier guard, an interlocked guard or a safety mat. See
Figure 9-6
.
Figure 9-6 Correct Light Curtain Installation Example
9.3.2
A
DDED
M
OUNTING
R
IGIDITY
It is recommended that when installing a MS4800 larger than 1000mm (40 in) in length, you use an
additional mounting bracket. This is to be installed using the T-slot on the backside of the transmitter
and receiver.
Figure 9-7 Adding Mounting Bracket
Supplemental
Guarding
Supplemental
Guarding
Supplemental
Guarding
Supplemental
Guarding
MS4800 Point of
MSF4800 3-Sided Guarding
MSF4800 2-Axis Guarding
Operating Guarding
Hazard
Zone
Ds
LIGHT CURTAIN
Mechanical
Barrier
Supplemental
Guarding
Example
ALTERNATE
T-SLOT
MOUNTING
ALTERNATE
T-SLOT
MOUNTING
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]